Posts

Showing posts with the label UEFI

Seriously, WHY would you do that? - Part 3

Image
Episode 3 - " Are we there yet? " Last time , we had the RX2600 plugged in and talking on the Management Processor (MP), and burned a copy of OpenVMS to a DVD.  Now let's get this thing running.  The green on black terminal mode is not required, but it does make things feel so much more serious.  I recommend it. Of course, it's not as simple as it sounds! My system had previously been configured with HP-UX as you can see from the Boot Manager menu.  With the DVD in the internal drive, I scrolled down (using the "v" key) and hit enter to boot it.  Wait a while (patience is a virtue...), you will get an OpenVMS startup message.  So far so good! After a long time you get the installation menu for OpenVMS.  Wait a while again... Alright!  Now, type INITIALIZE (Aussies, Kiwis, Brits etc, just tolerate the spelling) because this is an existing disk, and we're going to clobber it. And this is why my problems began...  ...

FreeBSD, IBM x-Series and UEFI

FreeBSD, IBM x-Series and UEFI I banged my head on the rack for quite a while getting an x3250M3 to boot FreeBSD 9.1 recently, and I thought I would share what I learned. I am using the standard LSI Logic RAID controller (mpt device) with a pair of mirrored 500GB SATA drives.  Ultimately I intend to attach it to a DS4700 array I have lying around in the lab as well, but that's a topic for another post.   So we could boot from the Mylex controller, it is essential that you enable "legacy" boot in the boot manager I could boot from the 9.1 (AMD64) DVD and everything would install just fine.  When I rebooted, the system would just hang.  Oddly enough, I could boot NetBSD from the same machine, so what was the difference? Probably a lot, but then I stumbled across a FreeBSD UEFI WIKI, https://wiki.freebsd.org/UEFI which had the following gem: " Partitions not seen. When using GPT, FreeBSD will create a protective MBR. This MBR has one partition entry coveri...